Skip to content
SR Machineries & Spares Online

Armatures

Shop 56 armatures online starting ₹480. GST invoice, pan-India delivery, free pickup for damaged or defective items.

Find by machine model ↓
56

Find your part

Armatures by machine model

51 parts listed by the tool they fit. Pick your model to see the part, price and delivery.

Angle Grinder
Blower
Circular Saw
Cut-Off Machine
Electric Drill
Hammer Drill
Impact Drill
Marble Cutter
Orbital Sander
Percussion Hammer
Putty Mixer
Router
Vibrator

Buying guide

Armature buying guide

The armature is the rotating part of a power tool's motor: a shaft with copper windings, a commutator that the carbon brushes run on, and usually the cooling fan and drive pinion. When the windings overheat or short, the tool loses power, sparks heavily at the brushes or stops altogether.

Armatures are specific to the motor they were made for. Length, shaft diameter, fan, commutator size and the pinion's teeth all have to match, so always buy by the machine's model code rather than by wattage or tool type.

How to choose the right part

  1. Read the model code on the tool's nameplate (the label or moulded text on the motor housing), for example DW801, 9553, G10SS or GDC34, and pick that model in the table above.
  2. If the label is worn, compare the old armature: overall length, the number of commutator segments and the pinion at the gear end.
  3. Replace the carbon brushes at the same time; worn brushes damage a new commutator quickly.
  4. If armatures keep burning out, check the field coil and switch as well before fitting another one.

Can't find your model? Send us the model number and we will check what fits.

Common questions

How do I know the armature is the problem?
Typical signs are a ring of sparks around the commutator, a burning smell, a motor that hums but won't turn, or a big loss of power even with new carbon brushes. Blackened or loose windings on the armature confirm it.
Can I fit an armature from a different model?
Only if the manufacturer used the same motor in both models. Different lengths or pinions will not fit the gear housing, so match the model code.
My model is not in the list. What now?
Search the model code in the search box, or send us the model and a photo of the nameplate through the contact page and we will check what fits.