Skip to content
SR Machineries & Spares Online

Carbon Brush

Shop 24 carbon brush online starting ₹25. GST invoice, pan-India delivery, free pickup for damaged or defective items.

Find by machine model ↓
24

Find your part

Carbon Brush by machine model

24 parts listed by the tool they fit. Pick your model to see the part, price and delivery.

Angle Grinder
Cut-Off Machine
Electric Drill
Hammer Drill
Marble Cutter
Percussion Hammer
By brush size3 sides in mm

Buying guide

Carbon brush buying guide

Carbon brushes carry current to the spinning armature and wear down with use, so they are the most frequently replaced part in a power tool. Worn brushes cause heavy sparking, a motor that cuts in and out, or a tool that will not start.

Brushes are listed by the tool model they fit, and generic brushes by size: three dimensions in millimetres such as 9X6X14. Measure the old brush, not the holder, and match all three numbers.

How to choose the right part

  1. Read the model code on the tool's nameplate (the label or moulded text on the motor housing), for example DW801, 9553, G10SS or GDC34, and pick that model in the table above.
  2. No model listed? Measure the three sides of the old brush in millimetres and pick the size with the same three numbers.
  3. Always replace both brushes as a pair, and check that the spring and lead are intact.
  4. Run a new pair at no load for a minute so they bed in to the commutator.

Can't find your model? Send us the model number and we will check what fits.

Common questions

When should carbon brushes be replaced?
When they have worn to roughly a third of their original length, when the wear-limit mark is reached, or as soon as sparking increases or the tool cuts out.
Why replace both brushes?
Both wear at about the same rate. A new brush paired with a worn one makes poor contact and wears the commutator unevenly.
What if sparking continues with new brushes?
Heavy sparking with good brushes usually means a damaged commutator or a failing armature.